JBI Suspension Fauxshima Coating

• Coats outside of fork upper / outer tubes in a bronze brown semi gloss finish
• Inside of fork tube is sealed off and not coated
• Gives fork upper tubes similar look as JBI Kashima coat
• This is a JBI Suspension Anodize process
• KYB, Showa, and WP brand tubes all finish uniquely different in tone due to different metal alloy
• The price of $450 is for coating a set of fork tubes (2 pieces)
• Cheaper then Kashima coat
• Usual turn around time is 1-3 weeks (7-21 days)
• Faster turn around time then Kashima coat
• New tubes and used tubes are accepted and can be coated
• The better condition of the tube the better the coating finish

What is JBI Fauxshima Coat?
JBI Fauxshima Coat is a specific bronze brown colored anodize to look similar to Kashima Coat for a lesser price.  The anodizing process forms an abrasion resistant and sealing oxide layer on aluminum, titanium, and magnesium metals.   This is accomplished in a low temperate bath solution of sulfuric acid charged with a electrical current.  Anodize coatings evenly penetrate into the part and build up onto the part being coated.  Commonly referred to as a 50/50 coating.  50% penetration.  50% build up.  JBI Suspension Anodize is performed at a specialist anodize facility that has decades of experience coating suspension and related motorsports parts.  This valuable experience provides consistent and beautiful anodize finishes every time.

1.2.23

Motocross | Off-Road | WORCS | Enduro | Free Riding | Arenacross | Freestyle Moto